To support the industry and stakeholders in the use of consistent terminology, Ipieca, IOGP, GIE and MARCOGAZ prepared this methane emissions glossary covering the whole natural gas value chain.

Intended for policymakers and regulators working on methane regulation in Europe, this glossary will be updated to reflect new legislation and technologies.

All | # A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
There are currently 3 names in this directory beginning with the letter V.

Vane anemometer
Device to measure flow using a vane wheel. (Note – Consists of a vane wheel flow velocity sensor and handheld unit that displays the measured velocity of gas that passes through the device’s vane wheel. Vane anemometers are best for measuring open ended lines and end-of-pipe vents of known cross-sectional area. They do not require complete capture of emissions.)

Vented emissions
Gas released into the atmosphere intentionally from processes or activities that are designed to do it, or unintentionally when equipment malfunctions or operations are not normal. (Note - In the case of transmission and distribution grids, unintentional vented emissions during not normal operation cover also vents due to external interference (third-party damage), ground movements, over pressure, etc.)

Operational release of gas into the atmosphere. (Note - Often carried out in order to maintain safe conditions.)


[1] Directive 2009/73/EC of the European Parliament and of the Council of 13 July 2009

[2] EN-12186 – Gas infrastructure – Gas pressure regulating stations for transmission and distribution – Functional requirements

[3] EN-12327 – Gas infrastructure – Pressure testing, commissioning and decommissioning procedures – Functional requirements

[4] EN-12583 – Gas Infrastructure – Compressor stations – Functional requirements

[5] EN-15446 – Fugitive and diffuse emissions of common concern to industry sectors – Measurement of fugitive emission of vapours generating equipment and piping leaks

[6] GIE & MARCOGAZ Report “Potential ways the gas industry can contribute to the reduction of methane emissions”

[7] IPIECA/API/IOGP (2020). Oil and gas industry guidance on voluntary sustainability reporting

[8] IPIECA Methane Glossary

[9] ISO 14532 – Natural gas — Vocabulary

[10] JCGM-100 – Evaluation of measurement data – Guide to the expression of uncertainty in measurement. s.l.: Committee for Guides in Metrology (JCGM/WG 1), 2008

[11] MARCOGAZ – Assessment of methane emissions for gas Transmission and Distribution system operators, 2019 Assessment+of+methane+emissions+for+gas+Transmission+and+Distribution+system+ operator.pdf?t=1602849054

[12] MARCOGAZ – Guidance for using the MARCOGAZ methane emissions reporting template – DSO, TSO, LNG receiving terminals and UGS

[13] MGP Reducing methane emissions: Equipment leaks

[14] MGP Reducing methane emissions: Identification, detection, measurement and quantification

[15] MGP Reducing methane emissions: Transmission, storage, LNG terminals and distribution

[16] Oil and Gas Methane Partnership Technical Guidance Documents

[17] Regulation (EC) No 715/2009 of the European Parliament and of the Council of 13 July 2009

[18] US EPA – ‘Method 21: Determination of volatile organic compound leaks’